DELTA WASP 4070
Best suited for industrial prototyping, the Delta WASP 4070 3D Printer provides precision and reliability on both the microscopic and macroscopic scale. The Delta WASP 4070 3D Printer offers double the print volume than that of its counterpart (the Delta Wasp 2040), giving the freedom to control the entire production process with 40cm x 70cm of space.
DELTA GEOMETRIC SYSTEM & SUSPENDED BOWDEN SYSTEM
The signature feature of WASP’s 3D printer line is its combination of the Delta Geometric System with its Suspended Bowden System. Other FDM 3D printers work on the Cartesian System providing an x, y, and zed axis. The Delta WASP 4070 3D Printer uses the Delta Geometric System, which consists of 3 main arms connecting to the extruder, which move up and down independently. The position of the extruder is estimated by using trigonometric functions. This causes the vector of movement to be more precise as inertia is intrinsically lowered.
Especially noticeable in Cartesian Systems, the inertia surrounding the extruder can cause inaccuracy in 3D prints. WASP developed the Bowden System to further disperse the inertia onto hanging rubber-bands, which has improved the printing, the speed and quality on the Delta WASP 4070 3D Printer.
SPITFIRE BLACK EXTRUDER
The Spitfire Black Extruder is supplied as standard with an LT 0.7mm heater cartridge on the Delta WASP 4070 printer. The innovative WASP Spitfire System leads to a whole new generation of extruders for 3d printer: the modular architecture allows to mount a specific heater cartridge and nozzle for your needs. The SPITFIRE System is equipped with a new resistance that can bring the nozzle temperature up to 350 ° C, for printing more technical materials. The range of materials you can now print with the black spitfire is PLA, PETG, ABS, ASA, PVA, HIPS & Polypropylene.
LDM CLAY EXTRUDER KIT 2.0
The Clay Extruder Kit 2.0 is a LDM (Liquid Deposit Modelling) professional kit for fluid-dense and ceramic materials and is supplied as an Add On Kit to give you all the material flexibility available for the Delta WASP 4070. The Clay Extruder Kit 2.0 has the ability to eliminate air bubbles in the mixture before it is extruded. The Clay Extruder Kit 2.0 for the DW4070, includes a 5 litre tank and 10kg of Clay. Inside, there is a piston with two 4 bar gaskets, this pushes the material through the teflon pipe (diameter 12mm) and supplies the extruder. The cap located on the back has a safety valve set at 8 bar.
*When printing with dense materials on clay 3D printers, you will need to use an air compressor to get rid of all the air bubbles in the material tank, this is so the mixture can flow through the extruder smoothly without any breaks. You can use any EU specified air compressor with 3.5 – 5.5 bar pressure, which you can get online or at a hardware store.
INTERCHANGEABLE EXTRUDERS, NOZZLES & TOOLS
With the Delta WASP 4070 3D Printer you can choose from the Black Spitfire Extruder (doubles the printing speed), Fluid Dense Extruder (print with concrete, porcelain and clay), or the Basic Red Spitfire Extruder (fine and high-precision printing). Nozzles are heated for optimal extrusion of polymeric filaments, or kept cold for semi-fluid materials. All extruders can easily be exchanged on the Delta WASP 4070 3D Printer in one minute and can be done so mid-print.
The Resurrection System is an auto-save and back up feature on the Delta WASP 4070 3D Printer which allows you to stop 3D printing before completion and continue hours, days or weeks later from where you left off. The need to stop or interrupt print production and to get it back to it in the future at the same point where it was left, has been the motivation to create this new implementation. By interrupting the track to the Arduino with 12 volt and have added a diode and a 10.000 µF-condenser (little battery), WASP have evolved the function of “stop and save.”
FREE ZED SYSTEM
The Free Zed System is a recovery process on the Delta WASP 4070 3D Printer useful for clay and prototyping which gives you the ability to start printing from anywhere within the 3D print’s instructions. It allows you to print a file starting from a precise height of the model, as long as the height was previously selected. Essentially giving you the ability to print the one half of your design on the Delta WASP 4070 3D Printer and then begin a new print of the second half.
INTEGRATED END-FILAMENT SENSOR
The End-Filament Sensor is a built-in feature on the Delta WASP 4070 3D Printer, which senses when the end of the filament is near and this prevents pauses and increases time and speed during production.
USER FRIENDLY INTERFACE
The Delta WASP 4070 3D Printer offers a new 32 bit industrial quality proprietary board for improved speed, an LCD Display, built-in Wi-Fi and SD Card compatibility for easy accessibility and control. It is also compatible with Windows, Mac, and Linux operating systems. File extensions include: .stl, .gcode, .obj.
The printer bed on the Delta WASP 4070 3D Printer is enclosed within the chamber, providing thermal and acoustic insulation within a controlled environment. The heated chamber has an internal air filtration system and a de-humidifier compartment, making it safe for domestic environments.
FULL METAL COVER AND FRAME
Using 100% Aluminium and Coated Iron, the entire build of the Delta WASP 4070 3D Printer is made of industrial grade steel. Providing the most durable and reliable foundation for production also brings significant noise insulation.
- 3 x Daemon3D Recommends PLA
- 3 x Daemon3D Recommends ABS
- 3 x Daemon3D Recommends ABS